Application of Normalization set

Post Reply
Svobokopp
Posts: 9
Joined: 29 Feb 2016 18:16

Application of Normalization set

Post by Svobokopp » 18 Apr 2016 18:00

Hello everybody,

I want normalize the ReCiPe-Midoint and Endoint Results of my Studie to get the Unit points instead of kg-X-eq. or species.yr / DALY.
Do I have to multiply or divide the Normalisation-Faktors?

Thanks in advance.

Best regards.

Svobokopp

aciroth
Posts: 750
Joined: 09 May 2010 23:28

Re: Application of Normalization set

Post by aciroth » 18 Apr 2016 18:38

The LCIA result per category is divided by the normalisation value in openLCA - but you can take the nomalisation set from the openLCA method pack? As e.g. shown in the screenshot for ReCiPe, thus you do not need to enter or calculate it yourself? Just specify the normalisation set to be used when performing a calculation?
Attachments
2016-04-18 18_35_15-Fotos.png
2016-04-18 18_35_15-Fotos.png (48.66 KiB) Viewed 7572 times

Svobokopp
Posts: 9
Joined: 29 Feb 2016 18:16

Re: Application of Normalization set

Post by Svobokopp » 19 Apr 2016 11:50

Thanks, that was helpful.
It's easy to find in the calculation properties.

kr
svobokopp

hajar
Posts: 3
Joined: 26 Apr 2016 15:30

Re: Application of Normalization set

Post by hajar » 26 Apr 2016 15:38

hello,

in my case to run the calculation I don't find any set of normalization in the impact assessment method ( see picture attached)

how can i overcome this?

thank you


hajar
Attachments
Capture.PNG
Capture.PNG (28.66 KiB) Viewed 7516 times

aciroth
Posts: 750
Joined: 09 May 2010 23:28

Re: Application of Normalization set

Post by aciroth » 26 Apr 2016 17:25

Hello hajar,
you need to import the zolca files; EcoSpold1 does not support normalisation values.
Hth,
Andreas

hajar
Posts: 3
Joined: 26 Apr 2016 15:30

Re: Application of Normalization set

Post by hajar » 26 Apr 2016 17:58

HELLO,

thank you for your answer

the file imported for LCIA method is a zolca file not ecoSpold1

so what can be the problem?
is it because I'm working with an academic licence?
I have another question sin I'm working whit ecoinvent database witch one is suitable for my case?
I want to calculate the EI of transportation


thank you
hajar

aciroth
Posts: 750
Joined: 09 May 2010 23:28

Re: Application of Normalization set

Post by aciroth » 26 Apr 2016 21:23

Well, if you import the 1.5.5 method pack from the download page at openlca.org (direct link: http://www.openlca.org/documents/14826/ ... 54d0e814db), import this as database into an existing or into a new database in openLCA, then you have the normalisation values for those methods where these are available. See the pictures below. This is completely independent from any other database licence that you have, academic or professional.
Hth,
Andreas
Attachments
2016-04-26 21_15_12-Fotos.png
2016-04-26 21_15_12-Fotos.png (12.43 KiB) Viewed 7512 times
2016-04-26 21_18_41-Fotos.png
2016-04-26 21_18_41-Fotos.png (57.29 KiB) Viewed 7512 times

hajar
Posts: 3
Joined: 26 Apr 2016 15:30

Re: Application of Normalization set

Post by hajar » 27 Apr 2016 15:21

Hello again,

I downloaded the OpenLCA LCIA method pack as you recommended but when i run the calculation with Recipe Midpoint H with the normalization set world Recipe H/H [year] i get this
pic1.png
pic1.png (86.94 KiB) Viewed 7508 times
is it maybe I didn't model in a good way my goal is : compare the impact of two transportation modes : truck and train per km ( see picture 2)
1- I created a flow called 'transportation'
2-I created a process called 'transportation mode 1' and another process 'transportation mode 2'
3 - for each process I created a product system and then I run the calculation
pic1.png
pic1.png (86.94 KiB) Viewed 7508 times
my questions are:
- how can I add the diesel consumption for mode 1 and diesel and electricity for mode 2? because I did and for the category fossil depletion I get 0
- why do I get the zeros in every category

thanks
hajar
Attachments
pic2.png
pic2.png (108.75 KiB) Viewed 7508 times

aciroth
Posts: 750
Joined: 09 May 2010 23:28

Re: Application of Normalization set

Post by aciroth » 27 Apr 2016 17:34

Hello hajar,
can you please post a picture of your product system (model graph)? You did not include a picture there, maybe the system is not containing any supply chain? This would explain the "0" values. Maybe it is an idea to check the youtube video on how to create product systems, here: https://www.youtube.com/watch?v=kEosW6PceVg.
Best
Andreas

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests